| PRESSURE SENSITIVE LAMINATING MATERIALS |
| Seal Standard Range |
CODE |
SIZE |
| PRINT SHIELD STANDARD MATTE |
| An economy 75 micron matt PVC film coated with an acrylic emulsion adhesive. Does not give the "milky" effect of other matt films. Suitable for most types of media. |
12214 |
1040mm (41") x 100m |
| 13097 |
1295mm (51") x 100m |
| 13695 |
1400mm (55") x 100m |
| 10492 |
1550mm (61") x 50m |
| PRINT SHIELD STANDARD LUSTRE |
| An economy 50 micron PVC film, coated with an acrylic emulsion adhesive. Gives a soft, non-reflective finish. Suitable for most types of media. |
10274 |
1040mm (41") x 100m |
| 11241 |
1295mm (51") x 100m |
| 11905 |
1400mm (55") x 100m |
| PRINT SHIELD STANDARD GLOSS |
| An economy 40 micron OPP film coated with an acrylic emulsion adhesive. Gives a good quality gloss finish. Suitable for most types of media. |
12646 |
1040mm (41") x 100m |
| 13500 |
1295mm (51") x 100m |
| 10197 |
1400mm (55") x 100m |
| 10978 |
1550mm (61") x 50m |
FLOOR GRAPHICS LAMINATES |
| FLOORGUARD |
| A 100 micron PVC heatseal film with an embossed, scuff and slip resistant, surface. |
61193 |
880mm (34.5") x 50m |
| 60565 |
1040mm (41") x 50m |
| 10475 |
1295mm (51") x 50m |
| Print Shield Sandtex (Formerly Floortex) |
| A 100 micron sand textured pvc coated with a solvent based pressure sensitive adhesive. Ideal for use on roll up and pop up systems where a hard wearing scuff resistant surface is required. |
61194 |
1040mm (41") x 50m |
| 10048 |
1295mm (51") x 50m |
| REMOVABLE MOUNT FILM |
| PRINT MOUNT REMOVABLE (Formerley FLOORGRIP 1) |
A clear emulsion acrylic adhesive, developed for the mounting mounting of floor graphics to vinyl and linoleum floors.
Removable. |
60146 |
1040mm (41") x 50m |
| 10983 |
1295mm (51") x 50m |
